Search:

I would also cover if you need to turn off Intel PROset as well. I know in chanalyzer that can be a real issue for people, or any of the "proprietary" wireless programs.

Oxygen

Yet another customer requesting below -100dBm support.. :)

Oxy

While it doesn't look extraordinarily bad, I see the WIFI jumping channels.. The lines going up and down are probably from your computer, but I would get the WiSpy away from the computer or USB hub...

This may not be the problem, but sometimes WiFi card config programs do not allow (on purpose) you to connect to an unsecured/default setting router. It is a security thing.. Maybe try adding an...

Do all the zoomed in images look like the second pic? Because the 2nd pic looks a lot like a cordless phone. What Wi-spy are you using?

I would do a zoomed in image at the lowest step possible...

Ditto.. agree'd.

Well the lines are probably in this case an artifact from the USB Spectrum Analyzer. if the range between lines is about 12 MHz then is is just interference inside the WiSpy itself.. IF however...

Possible that it is your card/wifi in the laptop.. Maybe it isn't compatible with UNII 2.. I use a Intel 5350 card, and do not have problems seeing anything on a XP with WZC on.. you might try...

This could be many things but is just probably the AP or your card doing it .. There are quite a few other posts on this here too so please look around for them.

Oxy

You would have to bluetooth or cable connect it to windows first, then inSSIDer should probably see it.. Otherwise if you cannot bluetooth the gps to your computer & a cable is not connectable, it is...

So Trent,
Are you saying that Chanalyzer 4, Lab, & Pro actually DOES go down to -110 or -105 now?? I like that screen shot a lot! Please tell me it is so :) I see some stuff down around -105 and...

Yes Brian in Chanalyzer v3 you can watch a recording that was recorded eailier, & record a new one at the same time. You can even play 3, 4, 5 recordings at the same time while doing comparisons -...

"Right clicking" to bring up a menu of WiFi channels, frequency, ect menu to easily change.. currently I have to keep going up to the top of the screen to do it.. Really annoying.... It is no longer...

No prob.. happy to help.. :)

It took me a good several months of daily use to get good at using Chanalyzer and the Wi-Spy's so don't feel bad.. In reality SA is a tricky business. Yes, do not...

Because there are 2 MAC address's associated with the AP.. not sure if you or someone else changed anything, by that is why it is showing 2 lines.. now if you didn;t do anything, I would be uncertain...

Please turn OFF all WiFi bluetooth ect. on the computer and any cell phones on your person when doing the scan.

Please rescan the area in question again and upload the file to this thread.

I...

BrianR,

This is my understanding..

Wi-Spy 2.4x2 IS upgradeable..
Wi-Spy DBx2 IS upgradable..
Wi-Spy DBx is NOT upgradable..
Wi-Spy 900x is NOT upgradable..

Wi-Spy 2.4x Unsure as to if...

First and probably only problem is that the dBm (signal) of the AP is WAY to strong! -27dBm that is your problem.. the computer and AP are SCREAMIING at each other!

Oxygen

I don't think it is a cordless phone, but narrow-band its really hard to identify sometimes.

Also, get that AP off 802.11n in 2.4GHz! You will keep running into problems! If you want to use...

Yep, that is the WiFi card just rotating through to see what channels are free and what's available.. turn off the card and it will go away.. :)

Oxygen

Possible cause is that the router and the laptop computer are too close to each other (like screaming at each other).. THe router is compensating by turning the power down on the TX to find a stable...

Bump...........
Also can you please re-allow the changing the WI-Fi to RF Freq from that right click drop down menu, as it has been erased, and it is really annoying to go up to the top of the...

Are you sitting right next to that wireless AP? Because you have some really strong signals on there.. You may be seeing leakage from the AP if you are too close to it, also it can not want to...

I see you have a microwave oven going also in those images in the center. I'd watch that interference .. However, the extra noise you see is the WiFi card in your laptop "Searching" for other...

Agree'd you do NOT have anyone on your network.. If he is on a different channel then it is IMPOSSIBLE for him to be using your network. Simple Wireless rules.. you can only use one channel at a...